Speed Dry

Speed Dry

Cubiertas Autoportantes

Speed Dry 1

Cover Panel


  • Treated aluminum sheet

  • Extruded polystyrene with high compression resistance.

  • Rubber gasket housing - Optimum watertight barrier (82 mm).

  • Drainage route. Evacuates condensation.

  • Dry chamber. Preserves from corrosion.

  • Self-positioning wedge. Guarantees the level between panels.





  • The SPEED DRY System does not need extra structures, straps or trusses for its placement.

  • They are more resistant to breakage than other sheet steel panels.

  • Its composition uses 0.8 mm sheets (for 52 mm panels) and 1 mm sheets (for 82 mm panels), which provide great rigidity.

  • They are composed of an extruded polystyrene core that is more resistant to compression than other insulating materials.

Thanks to these characteristics the professional AHORRA:

  • In assembly time.

  • In structural materials.


  • By CE Marking.

  • By the thickness of the sheet.

  • For the color of the sheet.

  • By the fixing system.

  • Inside the Extruded Polystyrene.

  • Due to the length of the sections without the need for straps.

  • For the possibility of lengths up to 12 meters.

Speed Dry 3

52 and 82 mm profiles

Our panels are equipped with tongue and groove profiles, designed to create a watertight barrier allowing condensation to evacuate


SPEED DRY self-supporting metal double-sided sandwich panels manufactured by MULTIPANEL comply with the CE Marking, which means that the following tasks are performed:

  • Factory Production Control (CPF)

  • Initial Type Tests (EIT)

  • Declaration of benefits

  • Marking and labeling

Factory Production Control (CPF)

The CPF involves the control of the production process, controlling the raw materials, the product in progress and the finished product, by carrying out the tests established by the Standard.

Initial Type Tests (EIT)

Initial type tests are tests carried out by accredited laboratories on different parameters, set by the standard, on a specimen with a sandwich panel or a complete panel. This means that the panels will be manufactured with the same characteristics as the samples that have already been tested by the laboratory. The model or specimen tested will always be the most unfavorable of the entire range in terms of parameters and the results obtained can be used in any range of measurements.

Declaration of benefits

MULTIPANEL issues a Declaration of Performance of the products it delivers to the customer. It is a Declaration where there is a list of the products with identification, their intended use, evaluation system, harmonized standard, notified bodies (laboratories) and declared performance of the products, according to the results of the tests in an external laboratory.

Esta declaración faculta a MULTIPANEL a colocar las etiquetas de Marcado CE sobre los productos.

Marking and labeling

All SPEED DRY panels manufactured by MULTIPANEL are labeled with the CE Marking which implies the compliance of each panel with the characteristics of the tests carried out.

The CE Marking consists of a label that includes the CE marking symbol. This label must be placed on the product visibly, legibly and indelibly, by means of an attached label attached to the packaging.

The marking indicates that the product complies with the application directives and must be placed at the end of the production control phase. It is the responsibility of MULTIPANEL that the CE marking and labeling reaches the end user who receives the product.

es_ESSpanish en_GBEnglish